+41 (0)44 818 18 18
Mon - Fri 8 am - 12 pm and 1 pm - 5:00 pm
SLS powders
for the industrial application
SLS powders
for the industrial application
3D print production-ready, end-use parts on Formlabs SLS printers with their family of SLS Powders. The materials, hardware, and software are developed and validated together to deliver peak performance while optimizing cost per part.

Artsupport will send the sample directly to you, free of charge.
Nylon 12 Powder
Nylon 12 Powder
Balancing strength and detail, Nylon 12 Powder is a highly capable material for both functional prototyping and end-use production of complex assemblies and durable parts with high environmental stability. Nylon 12 Powder is specifically developed for use on the Fuse 1.

  • High performance prototyping
  • Permanent jigs, fixtures, and tooling
  • Small batch manufacturing
  • Biocompatible, sterilizable parts

  • Ultimate Tensile Strength: 50 MPa
  • Elongation at Break (X/Y): 11 %
  • Refresh Rate: 30 %

Download Nylon 12 Powder Technical Data Sheet
Download Nylon 12 Powder Safety Data Sheet
Nylon 11 CF Powder
Nylon 11 CF Powder
Get the best of nylon and carbon fiber all-in-one with this tough but lightweight material perfect for high-performance, end-use applications that require superior stiffness and strength. Choose Nylon 11 CF Powder to produce lightweight parts that remain structurally and thermally stable and can sustain repeated impact.

  • Replacement and spare alternatives to metal parts
  • High-impact equipment
  • Tooling, jigs, fixtures
  • Functional composite prototypes

  • Ultimate Tensile Strength: 69 MPa
  • Tensile Modulus: 5.3 GPa
  • Refresh Rate (inert gas): 30 %

Download Nylon 11 CF Powder Technical Data Sheet
Download Nylon 11 CF Powder Safety Data Sheet
Nylon 12 GF Powder
Nylon 12 GF Powder
A glass-filled material with enhanced stiffness and thermal resistance for demanding industrial environments. Choose Nylon 12 GF Powder to produce functional prototypes or end-use parts for applications where structural rigidity and thermal stability are critical. This U-shaped duct highlights Nylon 12 GF Powder's stiffness and compatibility for hot fluid/air flow applications, as well as its dimensional accuracy thanks to the cap that threads perfectly into the part.

  • Glass-filled
  • Thermally stable
  • Dimensionally stable under sustained load
  • Suitable for long-term functional parts
  • Robust jigs and fixtures and replacement parts

  • Tensile Modulus: 2800 MPa
  • Heat Deflection Temp. @ 1.8 MPa: 113 °C
  • Refresh Rate: 30-50%

Download Nylon 12 GF Powder Technical Data Sheet
Download Nylon 12 GF Powder Safety Data Sheet
Nylon 11 Powder
Nylon 11 Powder
Use this high-performance material for functional prototyping and small batch production of compliant, robust parts. This model prints in two parts that slide and snap together: the top piece features a print-in-place slotted link mechanism mounted to a lever arm, while the spring in the bottom piece forces the mechanism between the two stable states.

  • Impact-resistant prototypes, jigs, and fixtures
  • Thin-walled ducts and enclosures
  • Compliant snaps, clips, and hinges
  • Orthotics and prosthetics

  • Ultimate Tensile Strength: 49 MPa
  • Elongation at Break (X/Y): 40 %
  • Refresh Rate: 50 %

Download Nylon 11 Powder Technical Data Sheet
Download Nylon 11 Powder Safety Data Sheet
TPU 90A Powder
TPU 90A Powder
Create flexible TPU parts with unmatched design freedom and ease. Balancing high elongation at break and superior tear strength, TPU 90A Powder enables you to 3D print flexible, skin-safe prototypes and end-use parts that withstand the demands of everyday use – all at a low cost per part thanks to a 20% refresh rate.

  • Wearables and soft-touch elements
  • Gaskets, seals, masks, belts, tubing
  • Soles, splints, orthotics, prosthetics
  • Padding, dampers, cushions

  • Tear strength (X/Y): 66kN/m
  • Elongation at Break (X/Y): 310 %
  • Refresh Rate: 20 %

Download TPU 90A Powder Technical Data Sheet
Download TPU 90A Powder Safety Data Sheet
LEARN MORE ABOUT THE SLS-3D PRINTER FUSE 1+ 30W
Quality - Tradition - Innovation
Everything for Jewellers, Designers and Dental Technicians
Thank you!
Your request has been accepted for processing.

Thank you!

Your request has been accepted for processing!

Thank you!

Your request has been accepted for processing!

Cart

Cart is empty

Subtotal

Discount on order

Discount with promo code

Shipping

Shipping cost isn't included in the total
order amount
Left to get free shipping
For this shipping method add products for
Add products for %total% and get a %discount% discount
Discount on order has changed
Learn more

Total

Add promo code

Order